Top >【Industrial】Food Machinery Lubricants

【Industrial】Food Machinery Lubricants

Food Machinery Lubricants

For locations associated with a risk of food, etc. being contaminated with a lubricant

NSF H1-Registered Lubricants Allowed to Come into Contact With Food

Oils

  • Use ingredients conforming to standards set by the Food and Drug Administration (FDA).
  • Registration as NSF H1 lubricants, which are permitted to come into incidental contact with food.
  • Ideally suited to gear oils, bearing oils, chain oils, hydraulic fluids and compressor oils for manufacturing, cleaning, filling, packaging and transportation equipment associated with a risk of food, pharmaceutical or cosmetic products being contaminated with a lubricant.
1. For Gears/Bearings/Chains/Hydraulic Equipment
Product Name ISO VG Appearance Base Oil Viscosity Index Flash Point Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Alivio Fluid
VG 32

NSF:Registration No.145686
32 Light Yellow Synthetic Oil 140 248℃ 1,236N -40~+150℃ A long life oil formulated with a synthetic oil that boasts excellent viscosity stability against temperature change and oxidation stability.
Ideally suited to gear oils, bearing oils, chain oils and hydraulic fluids.
1L×6 (Code : 319541)
4L×2 (Code : 319544)
20L (Code : 319545)
200L (Code : 319549)
Alivio Fluid
VG 46

NSF:Registration No.145687
46 147 262℃ 1,569N 1L×6 (Code : 319641)
4L×2 (Code : 319644)
20L (Code : 319645)
200L (Code : 319649)
Alivio Fluid
VG 68

NSF:Registration No.145518
68 155 262℃ 1L×6 (Code : 319041)
4L×2 (Code : 319044)
20L (Code : 319045)
200L (Code : 319049)
Alivio Fluid
VG 100

NSF:Registration No.145519
100 164 260℃ 1L×6 (Code : 319141)
4L×2 (Code : 319144)
20L (Code : 319145)
200L (Code : 319149)
Alivio Fluid
VG 150

NSF:Registration No.145520
150 175 272℃ 1L×6 (Code : 319241)
4L×2 (Code : 319244)
20L (Code : 319245)
200L (Code : 319249)
Alivio Fluid
VG 220

NSF:Registration No.145521
220 180 270℃ 1L×6 (Code : 319341)
4L×2 (Code : 319344)
20L (Code : 319345)
200L (Code : 319349)
Alivio Fluid
VG 320

NSF:Registration No.145522
320 185 270℃ 1L×6 (Code : 319441)
4L×2 (Code : 319444)
20L (Code : 319445)
200L (Code : 319449)
Alivio Fluid
VG 460

NSF:Registration No.148909
460 190 272℃ 1,961N 20L (Code : 300645)

■Comparison of stability of viscosity against temperature (Viscosity Index) with that of a general oil


2. For Compressor
Product Name ISO VG Appearance Base Oil Viscosity Index Flash Point Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Alivio Fluid CP
VG 32/46

NSF:Registration No.149806
32/46 Brown Synthetic Oil 150 261℃ - ≦+150℃ A long life oil formulated with a synthetic oil that boasts excellent viscosity stability against temperature change and oxidation stability.
Ideally suited to compressor oils.
20L (Code : 319745)
Alivio Fluid CP
VG 68

NSF:Registration No.149807
68 150 261℃ 20L (Code : 319845)
Alivio Fluid CP
VG 100

NSF:Registration No.149808
100 145 275℃ 20L (Code : 319945)
3. For High-Temperature Chain
Product Name ISO VG Appearance Base Oil Viscosity Index Flash Point Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Alivio Chain HT
VG 220

NSF:Registration No.151449
220 Yellow Brown Synthetic Oil 98 286℃ - ≦+250℃ The oil has excellent heat resistance, with low oil volatility at high temperatures.
Additionally in high-temperature chains, only a small amount of sludge, which can cause erratic or increased operation torque and obstruct refueling, is generated.
Use on conveyance chains for ovens for bread or confectionery, and on conveyance chains for can coating drying ovens.
4L×2 (Code : 343244)
18L (Code : 343245)
Alivio Chain HT
VG 320

NSF:Registration No.151448
320 91 284℃ 4L×2 (Code : 343144)
18L (Code : 343145)
4. Flushing oils
Product Name ISO VG Appearance Base Oil Viscosity Index Flash Point Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Alivio Flush
NSF:Registration No.149809
- Translucent Liquid
Paraffin
110 105℃ - ≦+80℃ A flushing oil to remove dirt such as sludge. 20L (Code : 503445)

Greases

  • Use ingredients conforming to standards set by the Food and Drug Administration (FDA).
  • Registration as NSF H1 lubricants, which are permitted to come into incidental contact with food.
  • Ideally suited to bearings, gears, chains, sliding parts, etc. in manufacturing, cleaning, filling, packaging and transportation equipment associated with a risk of food, pharmaceutical or cosmetic products being contaminated with a lubricant.
    ●Cooking pots●Ovens●Mixers●Mincers●Meat processors●Bottle washers●Bottlers●Canners●Conveyor belts●Any other equipment in particular need of avoiding lubricant contamination/pollution
1. General Purpose
Product Name NLGI
(worked penetration)
Appearance Thickener Base Oil Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
White Alcom
Grease

No.2
NSF:Registration No.123724
No.1
NSF:Registration No.123725
No.2
(282)
White Aluminum
Complex Soap
Liquid Paraffin 70mm2/s 2,452N -20~+200℃ The standard type. 80g×30 (Code : 242208)
400g×20 (Code : 242265)
2.5kg×2 (Code : 242272)
16kg (Code : 242290)
No.1
(329)
80g×30 (Code : 242108)
400g×20 (Code : 242165)
2.5kg×2 (Code : 242172)
16kg (Code : 242190)
Alivio Grease
FGM

No.2
NSF:Registration No.149805
No.1
NSF:Registration No.149804
No.0
NSF:Registration No.149803
No.2
(295)
Brown Special Calcium
Compounds
Poly-α-olefin
(PAO)
243mm2/s 3,923N -40~+200℃ A grease formulated with Poly-α-olefin(PAO)that has excellent low-temperature fluidity and oxidation stability.
A special calcium formula provides superior anti-seizure and rust-prevention properties.
It can also be used on plastic parts.
400g×12 (Code : 201267)
16kg (Code : 201275)
No.1
(340)
3,089N 400g×12 (Code : 201167)
16kg (Code : 201175)
No.0
(382)
3,089N 16kg (Code : 201075)
2. High Adherence
Product Name NLGI
(worked penetration)
Appearance Thickener Base Oil Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Alivio Grease
HD

NSF:Registration No.149796
No.2
(295)
White
Translucent
Aluminum Complex
Soap
Poly-α-olefin
(PAO)
460mm2/s 2,452N -40~+200℃ A grease formulated with Poly-α-olefin(PAO)that has excellent low-temperature fluidity and oxidation stability.
With a high viscosity oil base this grease has excellent adhesivity, and is particularly suited to areas that are exposed to splashes of water and where damping properties are required.
It can also be used on plastic parts.
400g×12 (Code : 200565)
16kg (Code : 200575)
3. Long Life
Product Name NLGI
(worked penetration)
Appearance Thickener Base Oil Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Sumitec
FG 901

NSF:Registration No.135865
-
(332:0W)
White PTFE Fluorinated
Oil
(PFAE)
145mm2/s 4,903N -30~+250℃ A long lasting, highly chemically stable fluorine grease.
Ideal for environments where the grease will be exposed to chemicals and for long term lubrication.
It can also be used on plastic and rubber parts.
100g (Code : 249660)
1kg (Code : 249670)
4. Seizure Prevention
Product Name NLGI
(worked penetration)
Appearance Thickener Base Oil Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Alivio
Paste

NSF:Registration No.149795
-
(273:0W)
White - Poly-α-olefin
(PAO)
150mm2/s 4,903N ≦+250℃ A seizure preventative with a high concentration of solid lubricants such as PTFE.
Use to prevent seizure on stainless steel screws and other parts when assembling machines.
It can also be used on plastic parts.
500g×6 (Code : 070067)
5. For Rubber Parts
Product Name NLGI
(worked penetration)
Appearance Thickener Base Oil Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
S Silicone
TA

NSF:Registration No.149762
-
(330:0W)
White
Translucent
Special Inorganic
Compounds
Silicone
Oil
250mm2/s - -50~+250℃ A lubricant that increases the ease of inserting rubber parts such as packing and seals during assembly.
Can also be used with EPDM.
100g×6 (Code : 289760)
1kg×2 (Code : 289770)

Lubrication Sprays

Lubricants allowed to come into incidental contact with food
  • Use ingredients conforming to standards set by the U.S. Food and Drug Administration (FDA).
  • Registration as NSF H1 lubricants, which are permitted to come into incidental contact with food.
  • Suited to locations associated with a risk of food, pharmaceutical or cosmetic products being contaminated with a lubricant. Examples include bearings, gears, chains, sliding parts, etc. in production equipment, cleaning equipment, filling equipment, packaging equipment, and transportation equipment.
Product Image Product Name NET, Packing Unit, Code Appearance Advantages Approximate Operating Temperature Range
画像 Sumifood oil Spray
NSF:Registration No.125306
420ml×24(12×2)
(Code : 521136)
White A low-viscosity oil spray containing PTFE, a solid lubricant with an excellent low friction property. ?10~+100℃
画像 White Lub Spray
NSF:Registration No.125307
420ml×24(6×4)
(Code : 521036)
A high-viscosity oil spray containing PTFE, a solid lubricant with an excellent low friction property.
Exhibits superior water resistance and adherence.
?10~+100℃
画像 Sumifood Grease Spray
NSF:Registration No.124371
420ml×24(12×2)
(Code : 521236)

A grease spray with excellent heat resistance and water resistance.
Can be used over a wide temperature range.

?20~+200℃
画像 SF Silicone Oil Spray
NSF:Registration No.138654
420ml×20
(Code : 568736)
Clear A light-lubrication, gliding and mold-release spray based on silicone oil that satisfies the Japanese Food Hygiene Law. ?50~+200℃
Lubricants allowed to come into direct contact with food
  • Use ingredients conforming to standards set by the U.S. Food and Drug Administration (FDA).
  • Registered as NSF 3H lubricants, which are permitted to come into direct contact with food.
  • Suited to locations where a lubricant comes into direct contact with food, pharmaceutical or cosmetic products.
  • Also effective in preventing food from sticking to processing machines (mold release).
Product Image Product Name NET, Packing Unit, Code Appearance Advantages Approximate Operating Temperature Range
画像 Sumifood oil 3H
NSF:Registration No.143514
480ml×24(12×2)
(Code : 521456)
Light Brown An oil spray based on edible oil that is tasteless, odorless and excellent in oxidation stability. -10~+100℃