Top >【Industrial】Fluorinated Greases

【Industrial】Greases

Fluorinated Greases

Excellent chemical stability based on fluorinated base oil

Achievement of Long-Term Lubrication with Excellent Chemical Stability

  • Exhibit stable performance over long periods with low oxidation degradation or evaporation, thanks to a fluorinated base oil (PFAE).
  • Excellent load bearing performance resulting from a combination of a PTFE thickener, solid lubricant additives, and a fluorinated base oil.
  • Can be used over a wide temperature range, from low to high, because of relative immunity to the effect of temperature changes.
  • Suitable even for use under vacuum conditions or in a clean room, thanks to the low vapor pressure of the base oil.
  • Can be used in demanding environments with exposure to chemical or solvent splashes or for plastic and rubber lubrication.

Standard

Product Name NLGI
(worked penetration)
Appearance Thickener Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Sumitec
F936
-
(300)
White PTFE 440mm2/s 3,923N −20~+250℃ The standard type. 1kg×2 (Code : 248570)
Sumitec
F931
-
(300)
400mm2/s Especially suited as a high-temperature fluorinated grease. 100g×6 (Code : 252360)
750g×12 (Code : 252365)
1kg×2 (Code : 252370)
Sumitec
F932
-
(270)
7,845N A fluorinated grease that improves on Sumitec F931 in terms of rust prevention. 1kg×2 (Code : 252470)
Sumitec
F932M
No.2
(280:0W)
7,845N A fluorinated grease that improves on Sumitec F931 in terms of rust prevention (containing a different antirust agent from Sumitec F932). 750g×12 (Code : 253168)
No.1
(314:0W)
6,080N 750g×12 (Code : 252768)
16kg (Code : 252775)

Low Temperature

Product Name NLGI
(worked penetration)
Appearance Thickener Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Sumitec
F943
No.3
(235)
White PTFE 58mm2/s 3,089N −35~+250℃ Capable of keeping torque loss low, thanks to low viscous resistance resulting from a low-viscosity base oil. 1kg×2 (Code : 248470)

Wide Temperature Range

Product Name NLGI
(worked penetration)
Appearance Thickener Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Sumitec
F950
No.2
(284)
White PTFE 140mm2/s 7,845N −50~ +250℃ Uses a base oil with excellent stability of viscosity against temperature.
Can be used over a wide temperature range, from low to high.
100g×6 (Code : 249160)
1kg×2 (Code : 249170)
Sumitec
F951
-
(287)
30mm2/s - Low viscosity base oil version of Sumitec F950 above.
Effective against torque reduction at low temperature.
1kg×2 (Code : 250271)

Conductivity

Product Name NLGI
(worked penetration)
Appearance Thickener Kinematic Viscosity of Base Oil
40℃
Weld Load by Shell Four-Ball Test
1760rpm,10sec
Approximate Operating Temperature Range Description NET, Packing Unit, Code
Sumitec
F970
-
(322:0W)
Black - 660mm2/s 7,845N −15~ +250℃ A black conductive fluorinated grease with a low volume resistivity (2.4×104) attributed to graphite, tin and other additives.
Ideal for bearings in printers, copiers and other machines that require antistatic measures.
100g×6 (Code : 249260)

Prior to using a fluorinated grease, please take note of the following points:

  1. As fluorinated greases have a stable chemical structure, they are not compatible with other synthetic or mineral oils. If a fluorinate grease is applied to a surface on which any antirust agent, grease or the like has previously been applied, it is likely to be repelled from the surface, resulting in seizure.
  2. Although fluorinated greases are less toxic than general-purpose greases and non-flammable, they emit fluorine gas if heated to 260°C or more as a result of thermal decomposition of their ingredients. For this reason, be sure to use them within the specified temperature range.
  3. To remove old fluorinated grease, cleaning with a highly fluorinated organic solvent, such as our Sumitec Solvent 72 (5 kg), is effective.