Top >【Industrial】Fluorinated Thin Film Lubricants
【Industrial】Greases
Fluorinated Thin Film Lubricants
Fluorinated liquid greasesEasy-to-apply thin film lubricants - effective in stopping creaking from plastic parts
Form a semi-dry lubricating film soon after application.
- Nonflammable lubricants produced by diluting a fluorinated grease with a fluorinated solvent.
- Form a thin, uniform semi-dry lubricating film following application to a friction surface as a result of the evaporation of the solvent.
- Allow dip coating of small parts, thanks to their excellent ability to penetrate into tiny recesses.
- Ready applicability to plastic and rubber parts and a long service life, made possible by excellent chemical stability.
- Ideal for use on electronic equipment, office equipment, home appliances, interior automobile parts and similar, to lubricate sliding parts and gears, and prevent joints from creaking/squeaking.
| Product Name | Appearance | Concentration of Active Agent | Diluting Solvent | Remarks | Approximate Operating Temperature Range | NET, Packing Unit, Code |
|---|---|---|---|---|---|---|
| Sumitec Liquid H5 |
White | 5％ | HFE | −40～+180℃ | 1kg×6 （Code : 239401） | |
| Sumitec Liquid H10 |
White | 10％ | HFE | −40～+180℃ | 1kg×6 （Code : 239501） | |
| Sumitec Liquid H15 |
White | 15％ | HFE | Based on a grease that uses a high-viscosity base oil. | −20～+200℃ | 1kg×6 （Code : 239641） |
| Sumitec Liquid H20 |
White | 20％ | HFE | −40～+180℃ | 1kg×6 （Code : 239741） |
■ High-performance liquid greases with improved dispersion stability, etc.
| Product Name | Appearance | Concentration of Active Agent | Diluting Solvent | Remarks | Approximate Operating Temperature Range | NET, Packing Unit, Code |
|---|---|---|---|---|---|---|
| Sumitec Liquid HD-002 |
White | Medium | HFE | Standard type. | −40～+180℃ | 1kg×6 （Code : 241370） |
| Sumitec Liquid HD-003 |
White | Medium | HFE | Works well under various temperatures, from low to high temperatures. Particularly suitable for use in areas where increased torque under low temperature conditions is not desirable. |
−65～+180℃ | 1kg×6 （Code : 241470） |
| Sumitec Liquid HD-004 |
White | High | HFE | For high loads/high durability. Particularly suitable for areas that require high durability. |
−40～+180℃ | 1kg×6 （Code : 241570） |
| Sumitec Liquid HD-005 |
White | High | HFE | High loads/high durability.Works well under various temperatures, from low to high temperatures.
Particularly suitable for areas that require high durability at low temperatures. |
−65～+180℃ | 1kg×6 （Code : 241670） |
Prior to using a fluorinated grease, please take note of the following points:
- As fluorinated greases have a stable chemical structure, they are not compatible with other synthetic or mineral oils. If a fluorinate grease is applied to a surface on which any antirust agent, grease or the like has previously been applied, it is likely to be repelled from the surface, resulting in seizure.
- Although fluorinated greases are less toxic than general-purpose greases and non-flammable, they emit fluorine gas if heated to 260°C or more as a result of thermal decomposition of their ingredients. For this reason, be sure to use them within the specified temperature range.
- To remove old fluorinated grease, cleaning with a highly fluorinated organic solvent, such as our Sumitec Solvent 72 (5 kg), is effective.
