Appearance Product Name |
Approximate Operating | Metal Lubrication | Plastic Lubrication | Rubber Lubrication | NLGI (worked penetration) |
Base Oil | Kinematic Viscosity of Base Oil 40℃ |
Weld Load by Shell Four-Ball Test 1760rpm, 10sec |
Solid Lubricants Contained | NET, Packing Unit, Code |
---|---|---|---|---|---|---|---|---|---|---|
Sumitec 353 |
Suitable for plastic-to-plastic lubrication. | |||||||||
−55〜+140℃ | ◯ | ◎ | △ | No.1 (325) |
Poly-α-olef in(PAO) |
78mm2/s | 1,569N | PTFE, MCA | 100g×20 (Code : 247660) 1kg×2 (Code : 247670) |
|
Sumitec 305 |
Suitable for plastic-to-metal lubrication. | −50〜+140℃ | ◎ | ◎ | △ | - (302) |
Poly-α-olef in(PAO) |
50mm2/s | 3,923N | PTFE, MCA, Organo molybdenum compounds |
1kg×2 (Code : 246170) 16kg (Code : 246175) |
Sumitec 308 |
Suitable for low temperature lubrication. A grease using a base oil that remains fluid even at an ultra-low temperature of -70℃. |
−70〜+140℃ | ◯ | ◯ | △ | - (300) |
Poly-α-olef in(PAO) |
21mm2/s | 1,961N | PTFE, MCA | 2.5kg×2 (Code : 248272) |
Sumitec 103 |
Can be used over a wide temperature range. A grease formulated with a lithium complex soap thickener, excellent in heat resistance. |
−40〜+200℃ | ◯ | ◯ | △ | No.1 (325) |
Poly-α-olef in(PAO) |
400mm2/s | 1,569N | - | 400ML×12 (Code : 245668) 2.5kg×2 (Code : 245672) |
Sumitec 304 |
High viscosity grease ideal for reducing noise from plastic gears or similar. A grease capable of absorbing impact and rustling noises, thanks to the dampening characteristics of a special polymer additive. |
−40〜+140℃ | ◯ | ◯ | △ | - (300) |
Poly-α-olef in(PAO) |
1,386mm2/s | 1,569N | PTFE, MCA |
2.5kg×2 (Code : 245472) 16kg (Code : 245475) |
Sumitec 370 |
Suitable when oil seepage is an issue. A grease that prevents oil separation and diffusion for remarkably low levels of oil seepage. |
−45〜+140℃ | ◯ | ◯ | △ | No.2 (275) |
Poly-α-olef in(PAO) |
137mm2/s | 1,569N | PTFE, MCA | 1kg×2 (Code : 247770) |
Sumitec F950 |
Suitable when the above greases cannot be used, e.g.in corrosive environments or at high temperatures. Long lasting fluorine grease with superb chemical stability and viscosity-temperature stability. |
−50〜+250℃ | ◎ | ◎ | ◎ | No.2 (284) |
Fluorinated Oil (PFAE) | 140mm2/s | 7,845N | PTFE | 100g×6 (Code : 249160) 1kg×2 (Code : 249170) |
Sumitec F951 |
Suitable when the above greases cannot be used, e.g.in corrosive environments or at high temperatures. Low viscosity base oil version of Sumitec F950 above. Effective against torque reduction at low temperature. |
−50〜+250℃ | ◎ | ◎ | ◎ | - (287) |
Fluorinated Oil (PFAE) | 30mm2/s | - | PTFE | 1kg×2 (Code : 250271) |
◎=Best ○=Can be used △=Not very suitable