【Industrial】Molybdenum Disulfide Powders

▲To be added to plastic toothed belts.

【Industrial】Powders

To be added to materials, with the aim of improving wear resistance, stabilizing coefficient of friction, etc.

Adding Powders to Sliding Parts Improves the Wear Resistance of Materials

Crushed and dressed ores including molybdenum disulfide (MoS₂), have their impurities removed and are granulated into fine powders.
To be added to materials (sintered metal, brake, friction material, plastic, rubber, etc.), with the aim of improving wear resistance, stabilizing coefficient of friction, etc.

Product Name	Mean Diameter (Laser Diffraction) μm	Molybdenum Disulfide (MoS₂) wt%	Molybdenum Trioxide (MoO₃) wt％	Acid-Insoluble wt％	Water wt％	Iron wt％	NET, Packing Unit, Code
Moly Powder PS	1.4	98.1	0.02	0.30	0.07	0.12	2kg×2 （Code : 400271）
Moly Powder PA	5.2	98.2	0.01	0.28	0.03	0.13	2kg×2 （Code : 400071） 15kg （Code : 400074）
Moly Powder PB	23	98.6	0.01	0.29	0.01	0.13	20kg （Code : 400176）
Moly Powder PC	3.5	98.6	0.05	0.10	0.07	0.04	2kg×2 （Code : 400471） 15kg （Code : 400474）

●Typical Characteristics of Molybdenum Disulfide

Chemical Formula	Appearance	Mohs Hardness	Density	Coefficient of Friction	Load Carrying Capacity	Approximate Operating Temperature Range	Chemical Resistance
MoS₂	Soft and fine dark-gray powders	1	4.8g/cm³	0.04	784MPa	−75℃～＋400℃	High (not affected by anything other than hot sulfuric acid, hot nitric acid, or aqua regia)