Top >【Car Maintenance Products】Additives
【Car Maintenance Products】
Additives
Sumico Oil Additives Boast Long-Term Achievement
For gasoline engine of vehicles.
For diesel engine of large vehicles.
For differential of vehicles.
For construction equipment gears.
For gasoline fuel tanks. (Fuel Additives)For Gasoline Engine Oils ※Not to be used for engines of motorcycles nor two cycle engines.
| Product Image／ Container Size |
Product Name／ NET, Packing Unit, Code |
Description | Mixing Rate |
|---|---|---|---|
 |
ONGS Re-birth ●250ml×12（Code : 620925） |
Best for aging vehicles (heavily used vehicles). Additive with plenty of solid lubricants such as molybdenum disulfide, graphite, or PTFE, the main components of the coating film that improves the lubricity of the sliding portion in the engine. These lubricants adhere to the long worn sliding portion in the engine to form a highly durable lubricant film, and recover its original lubricity. In addition, the improved cleaning dispersibility removes the long accumulated sludge, and brings out the original ability of the engine oil. |
Pour all per 3 - 6L oil |
| H150×W80×D80 | |||
 |
ONGS StopLeak ●250ml×12（Code : 621325） |
For vehicles where oil seems to leak. Rubber seals such as gaskets or O-rings that keep oil sealed may deteriorate and shrink over time or due to heat, which may lead to oil leak or increased oil consumption. This product revitalizes reduced seals, and recovers the original sealing ability. It also disperses dirt, the cause of improper lubrication, and prevents re-adhesion to the components. Best for periodic maintenance of aging vehicles likely to leak oil. |
Pour all per 3 - 6L oil |
| H150×W80×D80 | |||
 |
Moly Speed Engine Treatment G Force ●250ml×40（Code : 620525） |
Additives formulated with high concentrations of special organo-metallic compounds and viscosity index improver. They retain oil film under high rotational speed and high temperature conditions, improve the compression efficiency, boost horsepower and are effective in reducing noise and wear. | Pour all per 3 - 6L oil |
| H137×68φ | |||
 |
Moly Speed Engine Coating G Black ●250ml×40（Code : 620725） |
Coating type additives formulated with high concentrations of molybdenum disulfide （MoS2）. They prevent wear of sliding surface inside the engine, lower fuel consumption, prevent damage to the engine during dry starts and are effective in boosting horsepower. |
Pour all per 3 - 6L oil |
| H137×68φ |
For Gasoline/Diesel Engine Oils ※Not to be used for engines of motorcycles nor two cycle engines.
| Product Image／ Container Size |
Product Name／ NET, Packing Unit, Code |
Description | Mixing Rate |
|---|---|---|---|
 |
Moly Speed Oil Kyokazai 21 ●300ml×40（Code : 620130） |
Additives formulated with a blend of organomolybdenum compounds. They reduce wear and control the elevation of oil temperature. This is best suited for use in oil of vehicles with displacement of 1600 cc or less. |
Pour all per 3 - 6L oil |
| H137×68φ | |||
 |
Moly Speed Oil Treatment Black ●250ml×40（Code : 620325） |
Additives formulated with molybdenum disulfide （MoS2） and graphite. They control the elevation of oil temperature and minimize wear of the sliding surfaces inside the engine. |
Pour all per 3 - 6L oil |
| H137×68φ |
For Diesel Engine Oils
| Product Image／ Container Size |
Product Name／ NET, Packing Unit, Code |
Description | Mixing Rate |
|---|---|---|---|
 |
Moly Speed Engine Coating D Black ●250ml×40（Code : 620825） |
Coating type additives, formulated with high concentrations of molybdenum disulfide （MoS2） and graphite. They prevent wear of the sliding surface inside the engine, lower fuel consumption, prevent damage to the engine during dry starts and are effective in boosting horsepower. | Pour all per 3 - 6L oil |
| H137×68φ | |||
 |
Moly Power Diesel ●500ml×12（Code ： 603019） ●1L×6（Code ： 603041） ●4L×2（Code ： 603044） ●18L（Code ： 603045） |
Coating type additives for diesel engine oil of large vehicles formulated with high concentrations of molybdenum disulfide（MoS2） and graphite. They are proven to be highly effective in preventing wear of the sliding surface inside the engine, lowering fuel consumption, prevent damage to the engine during dry starts and boosting horsepower. | Pour 5 - 10% of total oil |
For Gear Oils ※The addition of oil additives for gear oils only into oils for LSD (Limited Slip Diff) or AT (Automatic Transmission) is not allowed.
| Product Image／ Container Size |
Product Name／ NET, Packing Unit, Code |
Description | Mixing Rate |
|---|---|---|---|
 |
Moly Auto Gear ●100ml×30（Code ： 610312） |
Additives for manual transmission（MT） & differential oil, formulated with high concentrations of molybdenum disulfide （MoS2） and organo-molybdenum compounds. They prevent friction, wear, lower temperature elevation and noise. |
Pour 5 - 10% of total oil |
| H205×W90×D60 | |||
 |
SUMICO Gear Special Oil ●1L×6（Code ： 313141） ●4L×2（Code ： 313044） ●18L（Code ： 313045） |
Additives for the gear oil of large vehicles; formulated with a high concentration of molybdenum disulfide （MoS2）. They prevent friction and wear, and reduce any increase in oil temperature and noise. | Pour 5 - 10% of total oil |
Fuel Additives
| Product Image／ Container Size |
Product Name／ NET, Packing Unit, Code |
Description | Mixing Rate |
|---|---|---|---|
 |
ONGS Clean ●200ml×30（Code ： 621120） |
Fuel additive to clean the engine combustion system and recover its performance. |
Total amount for 30 to 75 L of gasoline |
| H167×W54×D54 |
