Industrial Product

Mold release agent

spray_mold

Mold release agent for use when molding binders such as plastics and rubbers.
Various products for use principally in reducing the frequency of maintenance work in the binder molding process/improving the precision of finishing.

Silicone mold release sprayFluorine mold release sprayVegetable oil mold release spray

Silicone mold release spray

  Product Name NET,
Packing Unit,
and Code		 Description
spray_mold_s Sumimold
S
420ml×20（Code ： 562036）
Silicone mold release spray.
High viscosity silicone oil base offers superior release characteristics and endurance.
Suitable for rubber, thermoplasticity/thermosetting resin mold release.
※Cannot be used for secondary fabrication of molded products.
spray_mold_s2 Sumimold
S2
420ml×20（Code ： 562836）
Silicone mold release spray.
Low viscosity silicone oil is used for the base, meaning no greasiness or aggravation of the operating environment by continuous spraying.
Suitable for release of rubber, thermoplasticity/thermosetting resin molds.
Reverse spraying is possible.
※Cannot be used for secondary fabrication of molded products.
spray_mold_sr Sumimold
SR
420ml×20（Code ： 561436）
Film type silicone mold release spray.
More than ample endurance with no greasiness, reduces cleaning of dies.
Suitable for CR, NBR, EPDM rubber molding.
※Cannot be used for secondary fabrication of molded products.
Back to Top

Fluorine mold release spray

  Product Name NET,
Packing Unit,
and Code		 Description
spray_mold_fh Sumimold
FH
420ml×20（Code ： 561636）
Fluorine compound and silicone compound type mold release spray.
Superior release characteristics and endurance. Suitable for release of high precision molds and rubber molds, thermoplasticity/thermosetting resin molds with a high mold temperature.
※Cannot be used for secondary fabrication of molded products.
spray_mold_f1 Sumimold
F1
420ml×20（Code ： 562236）
Fluorine film mold release spray.
Superior release characteristics and endurance. Suitable for release of high precision molds and rubber molds, and thermoplasticity/thermosetting resin molds with a high mold temperature .
※ Can be used for secondary fabrication of molded products if volume is small.
spray_mold_fa Sumimold
FA
420ml×20（Code ： 584636）
This product is "Sumimold F1" modified for use in secondary fabrication of molded products.
Back to Top

Vegetable oil mold release spray

  Product Name NET,
Packing Unit,
and Code		 Description
spray_mold_p Sumimold
P
420ml×20（Code ： 562136）
Vegetable oil mold release spray (high concentration type).
Mold release agent attached to the molded product can be removed by ordinary commercial cleaner agent.
Suitable for release of secondary fabrication thermoplasticity/thermosetting resin molds.
spray_mold_p2 Sumimold
P2
420ml×20（Code ： 561836）
A low concentration version of "Sumimold P".
Back to Top